The pocket radiometer is a new generation of multifunctional radiometer developed in accordance with the recommendations of the International Basic Committee on Radiation Health Protection and the provisions of the Chinese Basic Standards for Radiation Health Protection (
). It integrates dose rate and dose measurement, adds safety protection alarms and radioactive site divisions
Alarms, provides cumulative dose, is suitable for monitoring rays and rays, and is widely used in isotope radioactive worker protection detection, non-destructive testing, acceleration
br/> Personal safety protection monitoring for workers in the surrounding environment of nuclear medical equipment, nuclear medicine, irradiation, and laboratory nuclear facilitiesbr/> Instrument features
, Integrating dose rate and dose functions
, Adopt International and national radioactive health protection standards set alarms, dose rate measurement is automatic, continuous measurement, set radioactive sites and other alarm functions, adopt international unified units/(dose rate) and (cumulative dose) to directly display measurement Value
, four-digit LCD large screen display, clear displaybr/>, pocket-sized, easy to carry, low power consumption
Performance parameter table
, dose rate measurement range./
, Cumulative dose measurement display range&
, Relative error % of linear dose within the measurement range
Relative error % of metering rate within the measurement range
, Angular response %, %
, Alarm threshold dose rate setting range./
, energy range.
, energy response % (normalized)
% (compensated)
, dose rate measurement automatically changes the measurement time to Seconds
, power supply and power consumption. Battery, power consumption under background radiation is not greater than
, ambient temperature
, weight and size in grams,
Technical indicators The operation interface consists of a display screen, alarm It consists of a buzzer and two buttons (⊙) and (▲).
The LCD screen provides visual information feedback, including battery information, alarm conditions, and radiation dose detection values.
LCD display (introduction to display symbols)
Accumulation high precision
Dose rate lower precision
Set pool
Symbol
Description
Battery symbol
Flashes when the battery voltage is low and can still work for hours or days
Symbol
The displayed value is the dose rate, flashing seconds after each valid update
Symbol< br/> The displayed value is the cumulative dose
Symbol
When lit, it is the parameter setting state
The dose measurement value is a valid digit, and the measurement display unit is the cumulative display unit.
Power on and off
Press and hold the button for a few seconds to power on, and the buzzer will perform a self-check. First display the current software version number. Then the instrument automatically enters the dose rate measurement state.
Shutdown Press and hold the button for seconds, the display will turn off and the instrument will shut down.
Other operations (⊙), (▲)
Press the button to switch the display of cumulative dose and dose rate. Switch to the settings menu to set alarm thresholds, clear accumulated dose, mode settings, etc.
Measurement characteristics enable modification of a certain bit of the setting value in the setting menu. Press to change the value of this bit. After pressing the key to confirm the last input value, the modified or set value is saved.
Setting menu
Identifier
Setting value
Meaning
Not used
+
Dose rate alarm
+
Alarm threshold./
Parameters
Set parameters
Clear cumulative dose
Count tick mode
Cancel the counting beep mode
The counting beep mode means that the counting tube detects a count and the buzzer beeps once.
Personal Dosimeter A800726